Our new directional connector, the Ceros, helps align loads in the correct orientation and is simple to use. This added security is achieved with a removable, tamper-resistant captive bar that holds the Ceros captive on a harness or lanyard and a horn which prevents devices moving onto the connector’s spine. Also available with an internal wire gate. A full section top bar resists wear.
Product Name | Product Code | Colour | Dimensions | Weight | MBS (Major Axis) | MBS (Minor Axis) | MBS (Gate Open) | Gate Opening (X) | Certification | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
Ceros Screwgate Captive Bar - A562CB
|
A562CB | Titanium/Lime | 74 x 121mm | 87g | 25kN | 7kN | 7kN | 20mm | EN 362:2004 B & T, EN 12275:2013 B, H & T |
£19.99
|
|
Ceros Screwgate - A562LG
|
A562LG | Lime | 74 x 121mm | 86g | 25kN | 7kN | 7kN | 20mm | EN362:2004 T, EN12275:2013 B/H/T |
£18.99
|
|
Ceros Screwgate - A562OR
|
A562OR | Orange | 74 x 121mm | 86g | 25kN | 7kN | 7kN | 20mm | EN362:2004 T, EN12275:2013 B/H/T |
£18.99
|
|
Ceros Kwiklock Captive Bar - A563CB
|
A563CB | Titanium/Red | 74 x 121mm | 94g | 25kN | 7kN | 7kN | 19mm | EN 362:2004 B & T, EN 12275:2013 B, H & T |
£22.99
|
|
Ceros Locksafe Captive Bar - A567CB
|
A567CB | Titanium/Green | 74 x 121mm | 95g | 25kN | 7kN | 7kN | 19mm | EN 362:2004 B & T , EN 12275:2013 B, H & T |
£23.99
|
|
Ceros Screwgate - A562MG
|
A562MG | Matt Grey | 74 x 121mm | 86g | 25kN | 7kN | 7kN | 20mm | EN 362:2004 T, EN 12275:2013 B, H & T |
£18.99
|
|
Ceros Locksafe - A567MG
|
A567MG | Matt Grey | 74 x 121mm | 93g | 25kN | 7kN | 7kN | 19mm | EN 362:2004 T, EN 12275:2013 B, H & T |
£22.99
|
|
Ceros Locksafe Captive Bar - A567CBMG
|
A567CBMG | Matt Grey | 74 x 121mm | 93g | 25kN | 7kN | 7kN | 19mm | EN 362:2004 T, EN 12275:2013 B, H & T |
£23.99
|
DMM’s patented ‘Taperlock’ closing mechanism increases gate push-in and cross gate strength using a special flared profile on the nose of the carabiner, as well as allowing a snag free connection for your ropes, slings and devices.t won’t catch on gear, bolts or slings, giving easier clipping and removal from systems.
I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality.
A rope running over a full section top bar has more consistent handling characteristics than one running over an I-Beam surface. Our belay carabiners feature full section top bars for greater control rope control. Ropes loading over full section bar also bend less than those loaded over I-Beam surfaces, increasing rope longevity.
The top of the Ceros' spine prevents assisted breaking devices and rope controllers from twisting around the spine and cross-loading.