Rigging essentials.

An evolution of the Triple Attachment Pulley first brought to the market 10 years ago by DMM.

The hot forged swing-cheek pulley with an in-built three hole rigging plate allows creative configurations and enables direct connection to textile components to save on weight and complication. The Rigger Pulleys feature a new axle construction achieved by using highly accurate CNC operations, which produces a stronger axle/side plate interface for increased longevity.

Bolstered connection areas lead to high configured strengths. The newly developed side plates combined with the axle construction means a hugely increased MBS to 40kN. The side plates boast increased fairleads and tuned angles for more efficient prusik minding.

The Rigger Pulley comes in two versions; the Rigger and the Rigger Becket. Both feature high efficiency roller bearings.


  • Ultra-high strength pulley side plates
  • High efficiency roller bearings
  • Hollow axle for reduced weight
  • Increased rope-bearing cross-section for textile attachments to the attachment holes
  • Same sheave as previous Triple Attachment Pulley
  • New axle design to increase robustness of the axle/ nut to side plate interface
  • Can be used as rig plate with or without sheave
  • Optional M5 nut and bolt for locking side plates together and can be installed from either side

Spare parts info.
The locking hardware is non-structural and can be purchased separately. We recommend:

  • M5 x 16mm countersunk screw A2 stainless.
  • M5 Nyloc nut A2 stainless.

Tech Specs

Product Name Product Code Colour MBS WLL Dimensions Weight Rope Diameter Certification
Rigger Standard Green/Matt Grey PUL400 Green/Grey 40kN 8kN 68 x 94mm 176g 7-14mm EN12278:2007EN12278:2007
Rigger Standard Matt Grey PUL400MG Matt Grey 40kN 8kN 68 x 94mm 176g 7-14mm EN12278:2007EN12278:2007
Rigger Becket Green/Matt Grey PUL410 Green/Grey 40kN 8kN 68 x 124mm 198g 7-14mm EN12278:2007EN12278:2007
Rigger Becket Matt Grey PUL410MG Matt Grey 40kN 8kN 68 x 124mm 198g 7-14mm EN12278:2007EN12278:2007