HB Brass Offset Set 0-6
HB Brass Offset 0
HB Brass Offset 1
HB Brass Offset 2
HB Brass Offset 3
HB Brass Offset 4
HB Brass Offset 5
HB Brass Offset 6
HB Brass Offset Set 0-6
HB Brass Offset 0
HB Brass Offset 1
HB Brass Offset 2
HB Brass Offset 3
HB Brass Offset 4
HB Brass Offset 5
HB Brass Offset 6

Brass Offsets

Brass Offsets are crucial for protecting small flared cracks, often fitting perfectly where nothing else will go. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.

Product Name Product Code Colour Strength Weight Range Certification Price
HB Brass Offset 0 - A1700
A1700 Gold 2kN 4g 3.7 / 5.5mm EN 12276:2013
£17.99
HB Brass Offset 1 - A1701
A1701 Blue 4kN 7g 4.3 / 6.5mm EN 12276:2013
£17.99
HB Brass Offset 2 - A1702
A1702 Red 5kN 9g 5.6 / 7.5mm EN 12276:2013
£17.99
HB Brass Offset 3 - A1703
A1703 Silver 5kN 10g 6.0 / 8.5mm EN 12276:2013
£18.99
HB Brass Offset 4 - A1704
A1704 Purple 7kN 14g 7.5 / 10.2mm EN 12276:2013
£18.99
HB Brass Offset 5 - A1705
A1705 Green 7kN 17g 8.6 / 11.7mm EN 12276:2013
£18.99
HB Brass Offset 6 - A1706
A1706 Silver 10kN 24g 9.8 / 13.9mm EN 12276:2013
£18.99
HB Brass Offset Set 0-6 - A1700/06
A1700/06 Assorted 2 - 10kN 85g 3.7 - 13.9mm EN 12276:2013
£119.99

Micro protection for small cracks

As climbs become harder, the need to make the most of all available protection increases. Micro protection lets you protect cracks which normal sized pieces would not fit. Having these wires on your rack gives you more options.

Asymmetrical taper gives stable placements in offset cracks

Nuts with an offset taper protect cracks where normal nuts would not sit properly, such as flared cracks and peg scars. Use in combination with normal nuts to find security in almost any crack.

Wires soldered directly into heads for strength

The wires of IMPS and Brass Offsets are soldered directly into their heads. This allows a thicker wire to be used, increasing the strength rating of each nut.

Brass heads for optimal characteristics in marginal placements.

Brass nuts are made from a special blend of brass and silicone that is soft enough to bite into placements, but hard enough to resist pulling through them. This helps them make the most of marginal placements.

Colour coded for easy size identification

The DMM protection range is colour coded for quick and easy size selection. Colours are co-ordinated across passive and active protection, for quick selection of alternatives if your first choice doesn’t fit.

Passive protection works in wet and icy conditions

Passive protection works by jamming in constrictions to prevent falls. It is suitable for use in all conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced.